(as of Apr 28,2021 22:26:18 UTC – Details)
This Top Post Battery Switch is used for battery to isolate and secure the electrical system,suitable for the battery of your vehicle, boat, or RV. Different modes of transportation have different alternators that output varying power levels.
1.Never connect the battery disconnect switches to the positive terminal of your battery.
2.Always wear safety grasses gloves when working around the lead acid battery.
Battery Disconnect Switch
Designed for 12V System
125A Continuous at DC 12V
500A Instantaneous at DC 12V
Connected to the 15mm-17mm Battery Negative Column
Switch Type: Top Mount Knob Type
Dimensions: 3.3″ x 1.5″ x 1.5″
Includes: 2 x Green Battery Switch
Easy to Use:
1.This battery switch uses a green knob that turns clockwise or anti-clockwise to disconnect or connect the battery.
2.Loose is power off, tightening can be conductive.
3.By simply turning the knob about 45 degrees, you can engage or disengage the switch.
4.Bolt the negative battery cable onto the “male” end of the battery disconnect switch and tighten.
Made of heavy duty Brass alloy,Rust and corrosion resistant, durable made for safety use.
Used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.
The battery disconnect switch helps to disconnect battery easily to prevent it from draining down when not in use
Zinc alloy construction，used for top post terminal,15-17 mm cone battery negative post only, DC 12 V system, rated current: 125 A, On/Off 2 position.
Wide application for Car, Vehicle, RV and Boat batteries which have a standard 15-17 mm cone top post terminal
Heavy Duty,corrosion resistance,good conductive performance, durably made.
Knob type,can be adjusted into switch through the top of the screw, easy to install & simple to use.Loose / twist of the knob, then power will cut.